User Manual

THE MAIN MIXER
440
D If you want to add more parallel channels to your source channel, select the last created parallel channel and
select “Create Parallel Channel” from the Edit menu or context menu.
This adds another parallel channel to your source channel:
Another Parallel Channel created for Audio Track 1.
In the rack, the Parallel out jack(s) of the source Mix Channel/Audio Track device are automatically connected to
the Direct Input jack(s) of the first parallel Mix Channel. The second parallel Mix Channel is then connected to the
first parallel Mix Channel, and so on:
Parallel Channels 1 and 2 for the Audio Track 1 source channel in the rack.
! Since the Audio Track/Mix Channel device only has one pair of Parallel out jacks, any additional parallel chan-
nels have to be created from the last created parallel channel.
If your original channel is in mono, only the left parallel output is connected to the left input of the parallel channel.
3. Now, you can create Insert FX in each of the parallel channels and process the signal of your source channel
separately, in parallel.
q It might also be a good idea to create a separate Output Bus for the source channel and all parallel channels,
see “Creating an Output Bus”.
Creating a Parallel Output Bus
Parallel channels can also be created for Output Bus channels, for parallel processing of the entire Bus signal. The
following example shows a drum kit, with a channel for each drum, that we want to assign to an Output Bus and apply
parallel compression to:
Source device
Parallel channel 1
Parallel channel 2