User Manual

THE MAIN MIXER
433
• Each FX Send and FX Return in the Master Section strip has a display that shows the name of the last effect
in that send's signal path:
The names of three added Send effects are displayed in the Master Section strip.
3. If you need to re-route any connections, press [Tab] to flip the rack around.
The Send FX connections on the Master Section device.
! Note that the Master Section device must be unfolded to show the connections.
As you can see, all Send effects are placed outside the Master Section device - as opposed to Insert effects, which
are placed in the Insert FX container of the Master Section device.
• It’s also possible to manually connect devices to the FX Send and FX Return connectors according to the stan-
dard routing procedures (see “Manual routing”).
The signals always travel from the “FX Send” outputs, via the desired effect device(s), to the “FX Return” inputs on
the Master Section device.