User Manual

THE MAIN MIXER
430
D To edit the parameter assignments on the Insert FX Programmer panel, click the “Show Programmer” button
on the Mix Channel/Audio Track device.
The parameter assignments are made in the same way as when creating/editing regular Combinator devices (see
“The Combinator”). The parameters you assign to the Insert FX Programmer panel in the rack are automatically
mirrored on the four knobs and buttons in the Insert FX section on the channel strip.
2. If you like, you can choose to save your effect device setup in the Insert FX container (along with any parame-
ter assignments) as an Effect Combi patch by clicking the “Save Insert FX Patch” button (with the floppy disc
icon) on the Programmer panel.
This will bring up the Patch browser, where you can select name and location for your Effect Combi patch.
! You don’t have to save your insert effect as an Effect Combi patch unless you want to use the effect chain in
other songs later on. All settings are automatically stored when you save the Song document.
Bypassing Insert effects
D Click the “Bypass” button at the top of the Insert FX section on the channel strip, or on the device in the rack,
to bypass the insert effects for the channel.
The “Bypass” buttons on the channel strip and on the device.
Deleting Insert effects
Deletion of insert effects can be done either in the rack or with a mixer channel selected in the Main Mixer:
1. Select a Mix Channel or Audio Track device in the rack or a mixer channel in the Main Mixer.
2. Select “Clear Insert FX” from the Edit menu or context menu.
This will disconnect and delete all Insert FX devices of the selected channel. The deleted devices will be replaced
by an internal straight-through connection.