User Manual

THE MAIN MIXER
415
! If “Master Section” is selected, no controls are available in the window, since the Master Section lacks these.
• If the “Follow Selection” checkbox is ticked, changing sequencer track, Mix Channel/Audio Track device in the
rack, channel strip, or editing parameters on other channel strips will automatically change the Spectrum EQ
Window focus to show the signal of the corresponding mixer channel.
2. Tick the “EQ On” box to activate the EQ in the channel strip and bring up the parameters in the window.
You can also activate the HPF and LPF Filters, E Mode, HF Bell mode and LF Bell mode for the selected mixer
channel by ticking the corresponding checkboxes in the window. The pictures below shows how the different ob-
jects in the Spectrum EQ window correspond to the channel strip parameters:
The Spectrum EQ Window with the Filters, EQ, E Mode, Bell Mode and Analyzer functions active during audio playback.
The Spectrum EQ editing objects (points) and what parameter(s) they affect in the mixer channel strip.