User Manual

ROUTING AUDIO AND CV
394
Connecting cables
1. Click on the desired input or output jack on one of the devices, and drag the pointer away from the jack (with
the mouse button pressed).
A loose cable appears.
2. Drag the cable to the jack on the other device.
When you move the cable end over a jack of the correct type (audio/CV, input/output) it will be highlighted to
show that a connection is possible.
3. Release the mouse button.
The cable is connected. If both input and output are in stereo and you connect the left channels, a cable for the
right channel is automatically added.
! Dragging a cable to make a connection can be aborted by pressing [Esc] while keeping the mouse button
pressed.
D You can change an existing connection in the same way, by clicking on one end of the cable and dragging it to
another connector.
Connecting cables using pop-up menus
1. Click and hold (or right-click (Win) or [Ctrl]-click (Mac)) on a connector.
A pop-up menu appears, listing all devices currently in the rack.
2. Move the pointer to the device you want to create a connection to.
A sub-menu appears, listing all suitable input/output connections. For example, if you clicked on an audio output
on a device, the hierarchical sub-menus will list all audio inputs in all other devices.
• If a device is grayed out on the pop-up menu, there are no suitable connections on the device.
• An asterisk (*) next to the connector name on the sub-menu indicates that the connection is already occupied.
It’s possible, however, to select an occupied connection. Doing so will disconnect the existing connection and re-
place it.
3. Select the desired connector from the submenu.
The connection is created.