User Manual

SOUNDS, PATCHES AND THE BROWSER
360
Clearing browse focus
To clear browse focus for a device, use one of the following methods:
D Click anywhere in the rack background.
D Click the X symbol to the right on the orange browse focus label at the top in the Browser.
D Select another sequencer track (if the rack is not detached).
Setting browse focus
Apart from when creating and loading patches into a device, browse focus can be set anytime you like. This is very
useful if you're working in the sequencer where there are no browse buttons. Or if you want to set browse focus to a
non-patch device and replace it with something else.
1. Select a device in the rack, or a track in the sequencer.
In this example we select a Redrum track in the sequencer. As soon as the track (or device) is selected, the
Browser shows the track/device name on a gray background in the Browse Focus field:
2. Now, click the folder button in the Browse Focus field:
Browse focus is now set to the Redrum device:
3. Now, you can browse and load new patches into the Redrum device.
4. When you are done, clear the browse focus by clicking the X button in the browse focus field.
! If you are using two Browsers, the one in the Song window and the other in the detached rack window, browse
focus can only be set in one of the Browsers at a time.