User Manual

WORKING WITH PLAYERS
342
• The notes that fit the selected Key and Scale are displayed in light blue in the keyboard display in the Scales
section:
The Dorian scale in the key of E.
The notes in the selected Key and Scale are then automatically repeated throughout all octaves of the entire MIDI
Note range.
• Notes you play on your MIDI Control Keyboard/On-screen Piano Keys are indicated in orange in the Scales
keyboard display.
Creating a Custom Scale
D Create a custom Scale by clicking the desired keys in the keyboard display in the Scale section:
Selected notes are colored light blue. The selected notes are then automatically repeated throughout all octaves
of the entire MIDI Note range.
• You can easily switch between your Custom Scale and any of the preset Scales whenever you want, by clicking
the “Scale” display and selecting the desired scale from the list that appears.
• Your Custom Scale is automatically saved with the song.
Your Custom Scale is also saved in the Scales & Chords patch, should you choose to save your settings as a
patch.
Filter Notes
• When the Filter Notes switch is off (default), incoming notes outside the set Scale (see “Scales”) are trans-
posed to fit the scale.
Wrong notes are automatically transposed to the closest correct note. If the wrong note is equally near two correct
notes, the wrong note is transposed to the lowest of the correct notes.
• When the Filter Notes switch is on, incoming notes that are outside the set scale will be filtered out (silent) in-
stead of transposed.
The display below shows a hand symbol whenever wrong input notes are filtered out (silent).