User Manual

NOTE AND AUTOMATION EDITING
282
Creating new performance controller automation lanes
If you want to manually draw performance controller automation events for a controller which hasn’t already been
automated, you have to create a new Performance Controller Edit Lane for that parameter. Proceed as follows:
1. Open the note clip in Edit Mode.
2. Select the new performance controller to be automated by clicking on the Performance Controller Automation
Selector and selecting it from the pop-up list that appears:
In this example, we select Aftertouch.
3. A new Performance Controller Edit lane is created for the Aftertouch controller:
4. Now, you can draw Aftertouch performance controller events in the clip using the Pencil Tool as described in
“Drawing parameter automation events”.
Afterwards, you can edit the performance controller events the same way as with regular parameter automation
events (see “Editing parameter automation in Edit Mode”).
D It’s also possible to add any of the available device panel parameters as a performance controller.
Just select the desired parameter from any of the submenus at the bottom of the Performance Controller Automa-
tion Selector pop-up menu.
Deleting performance controller automation lanes
D To delete a performance controller automation lane, deselect it from the Performance Controller Automation
Selector list.
This brings up a confirmation alert if there is data on the lane (in any clip). You can delete without the alert by
pressing [Ctrl](Win) or [Cmd](Mac) when you deselect the parameter from the list.
Performance Controller
Automation Selector
Aftertouch Edit lane