User Manual

NOTE AND AUTOMATION EDITING
277
Here are examples of using the Reverse functions on a selected note clip and on selected notes in a note clip:
Automation editing
Overview
Automation in Reason is vector-based. This means that automation is stored in clips as automation events (points),
connected by lines.
Automation lanes for a Mixer 14:2 Level slider (top), Mute button (middle) and Aux Send slider (bottom) in Edit Mode. The Aux
Send automation clip at the bottom is open for editing.
• Parameter automation is contained in automation clips on Parameter Automation Lanes (see “Edit Mode ele-
ments”).
Each automated parameter has its own Parameter Automation Lane.
• Performance controller automation is stored on Performance Controller Edit Lanes in note clips (see “Edit
Mode elements”).
A note clip selected before
reversing.
The note clip reversed using the
“Reverse notes graphically” function.
The note clip reversed using the
“musical” Reverse function. Here, only
the notes’ start positions are mirrored.
Selected notes in a note clip before
reversing.
The selected notes reversed using
the “Reverse notes graphically”
function.
The notes reversed using the
“musical” Reverse function. Here, only
the notes’ start positions are mirrored.