User Manual

AUDIO EDITING IN THE SEQUENCER
218
1. Make sure the Speaker Tool is selected and place the cursor at the position on the Comp Row you would like
to audition.
The cursor switches to a speaker symbol with crosshairs next to it.
Auditioning a recording on a Comp Row.
2. Click and hold the mouse button depressed for as long as you want to listen.
The playback starts at the current crosshairs position and proceeds for as long as you keep the mouse button de-
pressed. The playback position is indicated by a vertical moving line on the auditioned Comp Row.
q With the Selection Tool (Arrow) selected, holding down [Alt]+[Shift](Win) or [Cmd]+[Shift](Mac) will switch to
the Speaker Tool.
! Note that auditioning recordings on Comp Rows will play back the unprocessed sound of the recording -
bypassing any settings in the Main Mixer.
q Using the Speaker Tool, it’s possible to audition recordings anywhere on any Comp Rows. The Comp Row
doesn’t have to be selected - it’s even possible to audition recordings on masked Comp Row segments.
Selecting a Comp Row for playback in a Single Take clip
In a Single Take clip, only the selected Comp Row will play back throughout the entire clip length. It’s also possible to
change Comp Row Levels and Recording Offsets in a Single Take clip. The picture below shows an open Single
Take clip in the Comp Editor. The clip consists of four separate takes, each on a separate Comp Row. When played
back, the recording on the selected “Take 4” Comp Row will play back:
A Single Take clip open in the Comp Editor with four recorded takes.