User Manual

ARRANGING IN THE SEQUENCER
167
Inspector displays for selected clips
In the sequencer Inspector, the Position and Length displays shows the start position and length of the selected clip.
For selected audio clips, four additional displays are shown: Fade In, Fade Out, Level and Transpose. If several clips
are selected, the displays show the values for the earliest (or topmost) selected clip in the song.
The Inspector displays for selected Audio Clips.
• Clip Position display
The clip Position display shows at what position in the song the clip begins. The display readout is divided into Bar,
Beat, 1/16 Note and Ticks (1/16th note=240 Ticks). The position can be edited according to the descriptions in
“Moving clips using the Inspector”.
• Clip Length display
The clip Length display shows the length of the clip. The display readout is divided into (from left to right) Bar,
Beat, 1/16 Note and Ticks. The length can be edited according to the descriptions in “Resizing clips using the In-
spector”.
• Fade In and Fade Out displays (audio clips only)
The Fade In and Fade Out displays for selected audio clips show the Fade In and Fade Out times for the audio in
the clip. The readout is divided into 1/16 Note and Ticks. The Fade times can be edited as described in “Inspector
segment displays”.
• Level display (audio clips only)
The Level display for selected audio clips shows the level of the audio in the clip. The readout is divided into dB
and 1/100 dB. The level can be edited as described in “Inspector segment displays”.
• Transpose display
The Transpose display shows the transposition of the audio recordings in the selected Audio Clip(s) - relative to
the original pitch. The display readout is divided into (from left to right) Semitones and Cents, See “Transposing
Audio Clips”.
Selecting multiple clips
In Song View, several clips can be selected, e.g. for cutting, copying, pasting, deletion, moving or resizing purposes.
D Press [Ctrl](Win) or [Shift](Mac) and select the clips.
Under Windows, you can also press [Shift] and click to select a range of clips on the same lane.