User Manual

RECORDING IN THE SEQUENCER
147
3. Locate the four backing vocal Audio Track devices in the rack, or their corresponding channel strips in the
mixer, and click their “Solo” buttons.
The four backing vocal Audio Track devices soloed.
Since we’re going to record the four backing vocal tracks through the outputs of the Master Section, we only want
the backing vocal tracks to sound. All other tracks in the song should therefore be muted.
4. Select the “Mixdown” track in the sequencer and select “Stereo” and “Master Section” from the “Select Audio
Input” drop-down list.
“Stereo” and “Master Section” selected as Audio Input source.
Selecting “Stereo” makes it possible to pan the backing vocal tracks in stereo before recording on the mixdown
audio track.
5. Adjust the parameters of each of the backing vocal track channel strips as desired.
q Don’t forget to set the panning of each of the tracks to spread them in the stereo panorama.