User Manual

SEQUENCER FUNCTIONS
120
Pre(-count) On/Off
D Click the Pre button to hear a pre-count (count-in) click sound before recording.
Pre-count will only be present before recording - not before regular playback. See “Click and Pre-count” for details
about selecting number of pre-count bars etc.
Click Level
D Adjust the audio level of the metronome (and Pre-count) with this slider.
See “Click and Pre-count” for more details.
Tempo
The current song tempo is shown in the display in BPM (Beats Per Minute) and 1/1000 of a BPM. You can edit the
tempo according to the descriptions in “Transport Panel segment displays”. The Tempo range is 1.000-999.999
BPM.
Tap Tempo
Instead of setting the Tempo with the Tempo control (see above), you can manually tap in the desired tempo in real-
time.
D Click the Tap button repeatedly to set desired sequencer tempo.
The tempo is defined by averaging the time between a minimum of two clicks and a maximum of 16 clicks. The
more clicks, the more “steady” the tempo. The time-out between two series of clicks is 2 seconds. The detectable
tap tempo range is 30-999.999 BPM.
Signature
The current song time signature is shown in the display. You can edit the time signature according to the descriptions
in “Transport Panel segment displays”.
The available Signatures are: 1/2-16/2, 1/4-16/4, 1/8-16/8 and 1/16-16/16.
Rewind and Fast Forward
D Click on the Rewind or Fast Forward buttons to move the Song Position Pointer in steps of one bar (from its
current position).
D To move the Song Position Pointer several bars at once, click and hold the mouse button depressed.
Instead of clicking the buttons, you can use the computer keyboard:
D Press [4] on the numeric keypad for Rewind and [5] for Fast Forward.
D If you click and hold the Rewind or Fast Forward buttons, or press and hold the [4] or [5] keys, the positioning
speed will be faster after the first 20 bars.
Play and Stop
D Click the Play button to start playback from the Song Position Pointer’s current position.
D Alternatively, press [Enter] on the numeric keypad on the computer keyboard.
D Click the Stop button to stop playback (or recording).
D Alternatively, press [0] on the numeric keypad or [Shift]+[Return] on the computer keyboard.
If you click the Stop button, or use the keyboard “Stop” commands, when the song is already stopped, the Song Po-
sition Pointer is moved according to the following rules: