User Manual

MENU AND DIALOG REFERENCE
1073
Delete Sample/Remove Sample
Redrum:
D To remove a sample from a Redrum drum machine, select its drum sound channel and then select “Delete
Sample” from the Edit menu.
The sample is removed from the drum sound channel and from sample memory.
NN19:
D To remove a sample from an NN19 Sampler’s memory, select the zone it belongs to, and then select “Delete
Sample” from the Edit menu.
The sample is removed from the zone and from sample memory.
NN-XT:
D To remove a sample from an NN-XT Sampler’s memory, select the zone it belongs to, and then select “Remove
Samples” from the Edit menu.
The sample is removed from the zone and from sample memory. The zone still remains though. To delete a zone,
you must use the option “Delete Zones”.
Delete Unused Samples
This menu item is used for the NN19 Sampler. When you select it, all samples that are not assigned to a key zone are
deleted from sampler memory.
This way you can make sure that you are not wasting any sample memory for samples that are not actually used.
Split Key Zone
This menu item is used for the NN19 Sampler. It splits the currently selected key zone in the middle. The new zone
is the upper half of the split, and is empty. The dividing point has a “handle” above it.
Delete Key Zone
This menu item is used for the NN19 Sampler. It deletes the currently selected key zone from the key map.
Reload Samples
This menu item is used with the NN-XT sampler. When you select this, any changes you have made on a loaded sam-
ple using the sample parameters (root key, loop settings, etc.) are immediately undone, and the settings revert back
to the original.
Add Zone
This menu item is used with the NN-XT sampler. It is used for adding an empty zone to the key map. An empty zone
can be resized, moved and edited in the same way as zones that contain samples.
An empty zone is indicated with the text “**No Sample**”. After you have added an empty zone, you can assign a sam-
ple to it.