User Manual

PULSAR DUAL LFO
1057
LFO 1&2 output sections
CV
There are two CV signal outputs for each LFO, plus two additional outputs for the CV signal phase inverted.
Audio
There are two Audio signal outputs for each LFO, plus two additional outputs for the Audio signal phase inverted.
The difference between the Audio outputs and the CV outputs is that the signals on the Audio outputs have higher
quality for use in e.g. audio processing applications.
Output LFO 1+2
CV
There is one CV signal output for the LFO 1 and 2 signals summed with each other.
Audio
There is one Audio signal output for the LFO 1 and 2 signals summed with each other at audio quality.
Envelope connections
Envelope Gate In
A CV signal with a value > 0 present on this input will gate the Envelope (see “Envelope”). When the CV input signal
decreases to zero or below, the gate is opened (deactivated).
Envelope CV Out
There is one CV signal output for the Envelope signal.