INSTALLATION MANUAL
The information in this document is subject to change without notice and does not represent a commitment on the part of Propellerhead Software AB. The software described herein is subject to a License Agreement and may not be copied to any other media except as specifically allowed in the License Agreement. No part of this publication may be copied, reproduced or otherwise transmitted or recorded, for any purpose, without prior written permission by Propellerhead Software AB.
Table of Contents
Introduction 7 Welcome! 8 About the Reason documentation 8 About operating system versions 8 What is in the Reason box? 9 The Reason installation DVD 9 Product authorization 9 The Reason download version 9 Using the Reason download version while waiting for the box 9 Installation 11 Requirements 12 Mac OS X 12 Windows 12 About the Audio Hardware 13 Audio hardware and Mac OS X 13 If you are using the Propellerhead Balance audio interface 13 If you are using the built-in audio hardware in your Macintosh 13
About deauthorizing the computer/Ignition Key 18 Running Reason on an authorized computer - or with an authorized Ignition Key hardware 19 Running Reason in Demo Mode 20 Setting Up 21 About this Chapter 22 First run - Reason Setup Wizard 22 About the Preferences 24 Setting up the Audio Hardware 25 Mac OS X 26 Windows 26 About Latency and other Audio Settings 26 Setting up MIDI Control Surfaces 27 Adding a Control surface 28 If your control surface model isn't listed 30 About the Master Keyboard 30 Master
TABLE OF CONTENTS
Chapter 1 Introduction
Welcome! Thank you for choosing Reason! Reason 9 introduces a new device type - Players - that can instantly transform any MIDI input into compelling music. The Note Echo device creates rhythmic, pitched MIDI delays for melodies, drum rolls, and more. The Scales & Chords device turns simple melodies into beautiful harmonies and chords so you can stay focused on the music making. The Dual Arpeggio device transforms chords into intricate and inspiring rhythms.
What is in the Reason box? If you have purchased the boxed version of Reason, the package contains the following items: The Reason installation DVD This DVD contains the Reason program installer, sound banks and additional content. Product authorization The license number and registration code required for the installation are printed on the DVD sleeve. The registration code is a one-time code used to register your Reason license to your Propellerhead user account.
INTRODUCTION
Chapter 2 Installation
Requirements Below you will find the minimum requirements for running Reason: ! Note that these are the minimum requirements! You will benefit from a fast computer with lots of RAM, since this will allow you to use more devices at the same time.
About the Audio Hardware The audio hardware is the computer equipment that converts the analog signals from instruments and microphones to digital signals that Reason can work with and store, and back again (for connection to an amplifier, headphones, or similar). This equipment could be a built-in audio card, a 2 channel USB interface, such as Propellerhead Balance, or a Firewire audio interface, or an audio card with several inputs and outputs, digital connectors, etc.
If you are using other audio hardware with your Windows PC ! To run Reason with full audio in and audio out functionality under Windows, an ASIO driver is required for the audio hardware. Reason can run with DirectX or MME drivers as well but this will only support audio out - and at considerably higher latencies than with ASIO drivers. 1. Make sure you have the latest ASIO driver for the audio hardware! Please check the manufacturer's web site for the latest versions. 2.
• If you are not using a USB keyboard, you may also connect the MIDI Out from the MIDI interface to the MIDI In on your MIDI keyboard. This is not strictly necessary to use Reason, but it will enable two-way communication when you run the Reason Setup Wizard which appears the first time Reason is launched (see “First run - Reason Setup Wizard”), or when using Auto-detect Surfaces in the Preferences (see “Adding a Control surface”). Whether auto-detection works or not depends on the keyboard model.
The Authorization system Reason uses an authorization system designed to be as flexible as possible, while at the same time providing the best possible copy protection for the product. Here's how it works: • • • • The core of the authorization system is your license number, which is registered to your user account on the Propellerhead web site. If you have a working Internet connection you can run Reason with Internet Verification.
Running Reason with Internet Verification When you launch Reason on an unauthorized computer, or without an authorized Ignition Key hardware connected, the following window appears: ! Note that this requires a working Internet connection (and that your Reason license has been registered to your user account as described in “Registering Reason”). D Enter the User name and Password for your Propellerhead account and click the Log in button. Reason now launches in authorized mode.
Authorizing your Computer/Ignition Key (for off-line use) ! Note that a working Internet connection is required to be able to perform the following steps. 1. Launch Reason. When you start Reason the following window appears: 2. Click on the “More Options” link. Your default web browser starts up and takes you to the More Options page on the Propellerhead web site, where the whole authorization process is described in detail. 3. Follow the link on the web page to download and install Codemeter.
If you are using an authorized Ignition Key or Propellerhead Balance audio interface instead of an authorized computer, you can just move the Ignition Key/Propellerhead Balance from your old computer to your new one.
Running Reason in Demo Mode If you don't have a Reason license, or if you don’t have an authorized computer or your optional Ignition Key hardware at hand and don’t have a working Internet connection, you can run Reason in Demo Mode: 1. Launch Reason. The following window shows up: 2. Click the "Demo Mode" button. Reason launches in Demo Mode.
Chapter 3 Setting Up
About this Chapter This chapter describes the settings you need to make before you can start using Reason. These are necessary in order to get any sounds to and from the program and to be able to play and control Reason via MIDI. First run - Reason Setup Wizard If you followed the instructions correctly in the last chapter, Reason should be running, and the first dialog in the “Reason Setup Wizard” guide should be open. This only appears the very first time the program is run.
• • The Setup Wizard will first try to find a compatible audio driver. It will automatically select the first compatible driver it finds. If this is the driver you wish to use, fine. If it isn't, select your preferred driver from the Audio Card Driver pop-up. If you don't know which driver to use, see “Setting up the Audio Hardware”. Next, Reason will try to auto-detect a Master Keyboard. If one is found and you want to use this, click "Use" and proceed.
About the Preferences The basic settings for audio and MIDI are done in the Preferences dialog. This is opened from the Edit menu (or, if you are running Mac OS X, from the Reason menu). The Preferences dialog. q Described herein are only the most important settings in the Preferences. For information about other Preferences settings, see the “Menu and Dialog Reference” chapter in the Reason Operation Manual pdf.
Setting up the Audio Hardware In case this wasn't done in the Setup Wizard, you need to establish a connection between Reason and the audio hardware. This is done by selecting a driver - a software component that acts like a link between the program and the audio hardware. Proceed as follows: 1. In the Preferences dialog, click the Audio tab. 2. Pull down the Audio card driver pop-up menu and select one of the available drivers. Which driver to select depends on the platform and the audio hardware.
Mac OS X D Select the option that corresponds to the hardware you want to use (the built-in audio connectors or some additional audio hardware that you have installed). q A number of predefined combinations of built-in inputs and outputs will also be available in the Audio Card Driver pop-up. The number of available input(s)+output(s) combinations depends of your computer’s specific audio hardware configuration.
Setting up MIDI Control Surfaces In Reason, MIDI keyboards or remote control devices are called control surfaces. MIDI input from control surfaces is handled by a system called Remote. Here are some of the main features: • • • • • • • You can use any number of control surfaces at the same time. The program supports a large number of control surfaces out of the box - knobs, faders and buttons on the surfaces are automatically mapped to the most useful parameters on the Reason devices.
Adding a Control surface 1. Open the Preferences dialog and click the Control surfaces tab. 2. If your control surface is connected via USB (or if you have made a two-way MIDI connection), try clicking the Auto-detect Surfaces button. Reason scans all MIDI ports and tries to identify the connected control surfaces. Note that not all control surfaces support auto-detection. All found surfaces are listed in the Attached Surfaces list. 3. To add a control surface manually, click the Add button.
6. An image of the selected control surface model is shown, often along with some information text - read this carefully. For some control surfaces, you need to select a specific preset to use the surface with Reason - this is noted here. 7. Use the MIDI Input pop-up to select the input port to which you have connected the surface. If in doubt, you can click the Find button and then tweak a control or play a key on the control surface to have Reason find the correct input port for you.
If your control surface model isn't listed If you can't find your control surface listed on the Manufacturer or Model pop-up menus when you try to add it, this means that there's no native support for that model. However, the program supports generic keyboards and controllers. Here's what to do: D Select "Other" on the Manufacturer pop-up menu and then select one of the three options on the Model pop-up menu.
Master Keyboard Input This allows you to set a preference for how Master Keyboard Input mode is selected: • • Standard mode This always sets Master Keyboard Input to the selected track. Separated mode This will allow you to independently select tracks while Master Keyboard Input is unchanged. When this is mode is active, Master Keyboard Input is set by clicking the device icon in the track list.
Setting up the Default Song It's possible to select a default Song which will automatically open as a “template” each time you select “New” from the File menu. The Default Song could be any Song you have created earlier, or a factory made Template Song. You can select this Default Song on the General tab in Preferences. 1. Select “Preferences” from the Edit menu (Win) or “Reason“ menu (Mac) and then click the General tab. 2. Click the "Template" radio button in the "Default Song" section. 3.
Reassigning the Function Keys in Mac OS X When you work with Reason, you will do a lot of navigating between the three main areas - the main mixer, the rack and the sequencer. The quickest way to switch between these areas is to use the function keys F5, F6 and F7 (see “Navigating between the areas” in the “Common Operations and Concepts” chapter in the Operation Manual and Help system for details).
4. Scroll down to the "Turn VoiceOver on or off" item in the Accessibility group and either remove the tick from the checkbox or assign it to another keyboard shortcut. 5. Now, you’re finished with the settings and can close the “Keyboard” window. From now on, the function keys and keyboard shortcuts will perform their intended functions in Reason.
