12.2

MIMIC CREATIVE SAMPLER245
Setting the sample range
First you could decide how much of the original sample you want to use - and where in the sample you want to work:
D Zoom and/or scroll in the Sample Overview to define the Sample range you want to work in.
To scroll, click and drag sideways between the dark yellow sample range markers. To zoom, click and drag any of
the sample range markers sideways. The set Sample range is automatically updated and displayed in the wave-
form display.
D To work in the entire Sample range, drag the left Sample range marker all the way to the left, and the right
Sample range marker all the way to the right, in the Sample Overview.
Zooming in the Waveform Display
D Click and hold the mouse button anywhere in the waveform display, then drag down to zoom in, and up to
zoom out in the waveform.
q Dragging sideways in the Waveform Display will scroll left/right.
Setting the sample start and end
D Drag the Start and End marker handles to where you want the sample to begin and stop playing back.
Note that the Start and End markers cannot be set in reversed order. If you want to play the sample backwards,
from the End marker to the Start marker, click the Reverse button (see “Reverse”).
• If you drag and move the Start/End marker up into the Slice Marker area above the waveform, the Start/End
marker will snap to the closest slices. This works in all modes, not just in Slice Mode:
D Alternatively, double click in the Waveform Display to position the Start marker. Hold down [Shift] and double
click to position the End marker.