11.3

MATRIX PATTERN SEQUENCER752
Alter Pattern
The Alter Pattern function modifies existing patterns. Note that there must be something in the pattern for the func-
tion to work on - using an Alter function on an empty pattern will not do anything.
! Note that Randomize and Alter affects both the Gate, Note and Curve CV!
Chaining Patterns
When you have created several patterns that belong together, you will most probably want to make these play back
in a certain order. This Pattern selection can be automated in the main sequencer, just like any other parameter au-
tomation.
Copy MIDI Notes to a sequencer track
It’s possible to copy the MIDI Notes of the currently selected Pattern to a track in your DAW’s sequencer:
1. Click to select the desired Pattern.
2. Click the “Drag MIDI Notes to track in sequencer” icon and drag to the destination track in the sequencer:
! Be sure to disable the Enable Pattern Section function on the Redrum panel afterwards, to avoid “doubled
notes” during playback.
! Curve patterns cannot be converted to sequencer data! Only the note pattern and the gate values will be con-
verted.