11.3

HALF-RACK EFFECTS691
RV-7 Digital Reverb
! Please, note that this device is not available in Reason Intro Rack Plugin.
Reverb adds ambience and creates a space effect. Normally, reverb simulates some kind of acoustic environment
such as a room or a hall, but you could also use it as a special effect.
• The Reverb device can be used as a send effect or an insert effect.
If several devices uses the same type of reverb, you should connect the reverb as a send effect, to conserve com-
puter power.
Parameters
The display to the left on the panel shows the selected reverb algorithm - the general type of reverb. By clicking the
arrow buttons you can change algorithm, with the following options available:
q If you need to conserve computer power, try using the Low Density algorithm. This uses much less power than
the other algorithms.
|
Algorithm
|
Description
Hall Emulates a fairly large, smooth hall.
Large Hall Emulates a larger hall, with pronounced pre-delay.
Hall 2 A hall reverb with a brighter attack than “Hall”.
Large Room Emulates a large room with hard early reflections.
Medium Room Emulates a medium-sized room with semi-hard walls.
Small Room A smaller room, suitable for “drum booth”-type reverbs.
Gated A gated reverb, that is abruptly cut off.
Low Density A thinly spaced reverb, where you clearly can here the individual echoes. Useful for strings and
pads and as a special effect.
Stereo Echoes An echo effect with the repeats alternating between stereo sides.
Pan Room This is slightly similar to “Stereo Echoes”, but the echo repeats have soft attacks.