11.3

Table Of Contents
SOFTUBE AMPS622
Introduction
The Softube Amp at the top and the Softube Bass Amp at the bottom
The Softube Amp and Softube Bass Amp are amplifier and speaker cabinet simulators based on the renowned mod-
elling algorithms developed by Softube. The two devices feature accurate simulations of some of the most coveted
vintage amplifier and cabinet models, that you can freely mix and match. Setting up a great amp tone for your guitar
or bass is easy, regardless of what type of sound you are looking for.
In this chapter the two devices will be described together using the collective name “Softube Amps”. Where parame-
ters differ between the two devices this will be duly noted. In Reason Rack Plugin the Softube Amp and Softube Bass
Amp Rack Extension devices can be found on the Effects palette.
Basic usage
The Softube Amps can be used to process any signal but are best used “live”, i.e. as insert effects on an audio track
that a live instrument is connected to, so that you can monitor the effect as you play and record. When recording
electric guitar or bass, the basic tonal character of the amp/cabinet very much affects how the instrument responds,
which in turn affects your playing. The Softube Amps allow you to set up a good basic tone with a minimum of fuss
so you can start recording straight away!
Front panel
The Softube Amps front panel can be divided into two main sections; the display area with Patch/Amp/Cabinet se-
lectors at the top, and a set of standard amplifier tone controls below. The Amp parameters (tone controls) are de-
scribed in “Amp panel controls”.
Common effect device parameters
While the specific parameters for the Softube Amps are described later in this chapter, some features and proce-
dures are common to all effect devices. Please, refer to “Common effect device features” for information about the
Input meter, the Bypass/On/Off switch and Signal Flow Graphs on the Softube Amps.