11.3
Table Of Contents
- Table of Contents
- Introduction
- Overview
- Audio and MIDI Basics
- Using Reason Rack Plugin as an Instrument
- Using Reason Rack Plugin as an Effect
- Working in the Rack
- Routing Audio and CV
- Sounds, Patches and the Browser
- The I/O device
- Kong Drum Designer
- Introduction
- Overview
- About file formats
- Using patches
- Pad Settings
- The Drum and FX section
- The Drum modules
- The Support Generator modules
- The FX modules
- Connections
- Using Kong as an effect device
- Using external effects with Kong
- Redrum Drum Computer
- Introduction
- About file formats
- Using patches
- Programming patterns
- Redrum parameters
- Using Redrum as a sound module
- Connections
- Dr. Octo Rex Loop Player
- Introduction
- About REX file formats
- Loading and saving Dr. Octo Rex patches
- Playing Loops
- Adding Loops
- Playing individual Loop Slices
- Slice handling
- Dr. Octo Rex panel parameters
- Dr. Octo Rex synth parameters
- Connections
- Europa Shapeshifting Synthesizer
- Introduction
- Panel overview
- Signal flow
- Playing and using Europa
- Panel reference
- Sound Engines On/Off and Edit Focus section
- The Oscillator section
- The Modifiers section
- The Spectral Filter
- The Harmonics section
- The Unison section
- The User Wave and Mixer section
- The Filter section
- The Amplifier section
- The Envelopes section
- Envelope 1, 2, 3 and 4
- Preset
- Adding a Sustain stage
- Adding and removing envelope points
- Changing the envelope curve shape
- Looping the envelope
- Editing levels only
- Creating “free form” envelope curves
- Using the Envelope 3 and Envelope 4 curves as Sound Engine waveforms
- Using the Envelope 4 curve as a Spectral Filter curve
- The LFO section
- The Effects section
- The Modulation Bus section
- Connections
- Tips and Tricks
- Grain Sample Manipulator
- Thor Polysonic Synthesizer
- Subtractor Synthesizer
- Malström Synthesizer
- Monotone Bass Synthesizer
- ID8 Instrument Device
- Rytmik Drum Machine
- Radical Piano
- Klang Tuned Percussion
- Pangea World Instruments
- Humana Vocal Ensemble
- NN-XT Sampler
- Introduction
- Panel overview
- Loading complete Patches and REX files
- Using the main panel
- Overview of the Remote Editor panel
- About Samples and Zones
- Selections and Edit Focus
- Adjusting parameters
- Managing Zones and Samples
- Working with Grouping
- Working with Key Ranges
- Setting Root Notes and Tuning
- Using Automap
- Layered, crossfaded and velocity switched sounds
- Using Alternate
- Sample parameters
- Group parameters
- Synth parameters
- Connections
- NN-19 Sampler
- Introduction
- General sampling principles
- About audio file formats
- About Key Zones and samples
- Loading a Sample into an empty NN-19
- Loading SoundFont samples
- Loading REX slices as samples
- Creating Key Zones
- Selecting Key Zones
- Setting the Key Zone Range
- Deleting a Key Zone
- About Key zones, assigned and unassigned samples
- Adding sample(s) to a Key Map
- Setting the Root Key
- Removing sample(s) from a Key Map
- Removing all unassigned samples
- Rearranging samples in a Key Map
- Setting Sample Level
- Tuning samples
- Looping Samples
- About the Solo Sample function
- Automap Samples
- NN-19 synth parameters
- Play Parameters
- Connections
- MIDI Out Device
- Quartet Chorus Ensemble
- Sweeper Modulation Effect
- Alligator Triple Filtered Gate
- Pulveriser
- The Echo
- Scream 4 Sound Destruction Unit
- BV512 Vocoder
- Introduction
- Setting up for vocoding
- Using the BV512 as an equalizer
- BV512 parameters
- Connections
- Tips and tricks
- RV7000 Mk II Advanced Reverb
- Neptune Pitch Adjuster and Voice Synth
- Introduction
- Overview and basic concepts
- Setting up for pitch processing
- Using pitch correction
- Using pitch shifting (Transpose)
- Using Formant control
- Using the Voice Synth
- Panel parameters
- Connections
- Softube Amps
- Audiomatic Retro Transformer
- Channel Dynamics Compressor & Gate
- Channel EQ Equalizer
- Master Bus Compressor
- Synchronous Timed Effect Modulator
- The MClass Effects
- Half-Rack Effects
- The Combinator
- Pulsar Dual LFO
- RPG-8 Arpeggiator
- Matrix Pattern Sequencer
- Mixer 14:2
- The Line Mixer 6:2
- Working with Players
- Settings
- The Reason Rack Plugin Settings dialog
- Index
SUBTRACTOR SYNTHESIZER297
Modulation Wheel
The Modulation wheel can be set to simultaneously control a number of parameters. You can set positive or negative
values, just like in the Velocity Control section. The following parameters can be affected by the modulation wheel:
Legato
Legato works best with monophonic sounds. Set Polyphony (see below) to 1 and try the following:
D Hold down a key and press another key without releasing the previous.
Notice that the pitch changes, but the envelopes do not start over. That is, there will be no new “attack”.
D If polyphony is set to more voices than 1, Legato will only be applied when all the assigned voices are “used
up”.
For example, if you had a polyphony setting of “4” and you held down a 4 note chord, the next note you played
would be Legato. Note, however, that this Legato voice will “steal” one of the voices in the 4 note chord, since all
the assigned voices were already used up!
Retrig
This is the “normal” setting for playing polyphonic patches. That is, when you press a key without releasing the previ-
ous, the envelopes are retriggered, like when you release all keys and then press a new one. In monophonic mode,
Retrig has an additional function; if you press a key, hold it, press a new key and then release that, the first note is
also retriggered.
Portamento (Time)
Portamento is when the pitch “glides” between the notes you play, instead of instantly changing the pitch. The Porta-
mento knob is used to set how long it takes for the pitch to glide from one pitch to the next. If you don’t want any Por-
tamento at all, set this knob to zero.
|
Parameter
|
Description
F. Freq This sets modulation wheel control of the Filter 1 Frequency parameter. A positive value will increase the
frequency if the wheel is pushed forward. Negative values invert this relationship.
F. Res This sets modulation wheel control of the Filter 1 Resonance parameter. A positive value will increase the
resonance if the wheel is pushed forward. Negative values invert this relationship.
LFO 1 This sets modulation wheel control of the LFO 1 Amount parameter. A positive value will increase the
Amount if the wheel is pushed forward. Negative values invert this relationship.
Phase This sets modulation wheel control of the Phase Offset parameter for both Osc 1 and 2. Note that Phase
Offset Modulation (Subtraction or Multiplication) must be activated for this to have any effect.
FM This sets modulation wheel control of the FM Amount parameter. A positive value will increase the FM
amount if the wheel is pushed forward. Negative values invert this relationship. Both oscillators must be
activated for this to have any effect.