9.5

WORKING WITH VST PLUGINS
364
Automating VST parameters
Automating VST parameters in the Reason sequencer works in a similar way as for native devices and Rack Exten-
sion devices. Basically, there are three ways of automating VST parameters in the Reason sequencer:
D Start recording in the Reason sequencer and then edit the desired VST parameters while recording.
Each of the edited VST parameters automatically gets their own automation lane on the sequencer track, with
clips and automation points recorded. Make sure the Parameter Automation is record-enabled on the track first.
Another alternative is this:
1. Click the Automate button in the Plugin Window.
2. Then, click the parameter you want to automate on the VST panel.
The automated VST parameter gets an automation lane in the Reason sequencer:
3. Then, you can draw automation clips and automation points, the same way you would for a native device or a
Rack Extension device.
D A third alternative is to select the parameter from the Track Parameter Automation popup above the track list
in the sequencer.
CV modulation of VST parameters
There are eight CV inputs on the rear panel of the Plugin Rack Device. These CV inputs can be assigned on the CV
Programmer panel of the Plugin Rack Device.
D Click the CV Programmer button on the VST Rack Device panel to unfold the CV Programmer:
The CV Programmer of the Plugin Rack Device.