7.1

MENU AND DIALOG REFERENCE
1017
Clip Color
Allows you to select a color for the selected clip(s). See “Coloring clips” for more details.
Track Color
Allows you to select a color for the selected track(s). The selected color is shown in the track list and will be assigned
to all new clips you create on the track. However, clips that are already on the track will not be affected - to change
color of existing clips, select the clips and use the “Clip Color” setting.
q If “Auto-color New Sequencer Tracks” is activated on the Options menu, tracks will get colors assigned auto-
matically when they are created.
See “Coloring tracks”.
Set Loop to Selection
This command sets the Left and Right Loop Locators to encompass all selected clips in the arrangement.
Set Loop to Selection and Start Playback
This command sets the Left and Right Loop Locators to encompass all selected clips in the arrangement. Then, se-
quencer playback is automatically started in Loop Mode. This function also has a keyboard shortcut: press [P].
Adjust Alien Clips to Lane
If an automation clip has been moved to a lane for a parameter with a different range (for example if you cross-
browse to another device type), it will be shown as alien and won’t play back. Depending on the data, you may be able
to fix this by selecting the clip and selecting “Adjust Alien Clips to Lane”. This scales the automation data in the clip
to fit the range of the current lane.
! If it’s not possible to scale the data, an alert will appear to tell you this.
See “About alien clips” for more information.
Quantize
This lets you quantize note clips and Single Take audio clips, as well as selected notes in note clips or selected Slices
in Single Take audio clips. See “Quantizing audio” and “Quantize”.
Edit Keyboard Control Mapping...
This menu command is available when Keyboard Control Edit Mode is selected. It will open a dialog where you can
assign a Keyboard Control for a selected parameter. See “Editing Keyboard Control” for more information.
Clear Keyboard Control Mapping
This menu command is available when Keyboard Control Edit Mode is selected. It will remove the Keyboard Control
mapping for a selected assigned parameter. See “Editing Keyboard Control” for more information.
Clear All Keyboard Control Mappings for Device
This menu command is available when Keyboard Control Edit Mode is selected. It removes all keyboard mapping you
have set up for the selected device. See “Editing Keyboard Control” for more information.