7.1

MENU AND DIALOG REFERENCE
1015
Split At Slices (Single Take Audio Clips)
This lets you split an open Single Take audio clip at the selected Slice Markers, and thus create several separate au-
dio clips out of a bigger one. See “Split at Slices”.
Convert Pattern Automation to Notes
If you have recorded or drawn pattern changes on a Redrum or Matrix track, you can have the whole track converted
to notes, in the following way:
1. Select the track with the pattern changes.
2. Select “Convert Pattern Automation to Notes” from the Edit menu or the context menu for the track.
For each pattern clip, the corresponding pattern is converted to note clips on the track (following the same rules as
for the “Copy Pattern to Track” function). The track will play back just the same as when you played the pattern de-
vice with the pattern changes.
D After the operation, the Pattern Select lane is switched off.
“Enable Pattern Section” (Redrum) and the Pattern Enable switch (Matrix) are automatically turned off.
D When you use this with a Matrix, you need to move the note clips to the track of an instrument device (typically
the device to which the Matrix is connected).
This is because the Matrix doesn’t make any sound itself.
Convert Block Track to Song Clips
This item is available only when the Blocks Track is on. Selecting this item will convert all Block Automation Clips on
the Block Track to regular clips on the respective tracks and lanes in the song.
Commit to Groove
This function is available if the track list has focus and one or several note lanes on the selected track have ReGroove
Mixer channels assigned.
Commit to Groove will move all notes (on all note lanes on the selected track) to their grooved positions and then re-
set the groove settings to “No Channel” for the note lanes. In other words, this makes the groove “permanent” - the
track will play back exactly as before, but you can now view and edit the grooved notes.
New Note Lane
Adds a new note lane to the selected track(s). This is the same as clicking the “+ Lanes” button above the track list.
Merge Note Lanes on Tracks
If there is more than one note lane on the selected track, this menu item will merge all note clips on all lanes into a
single lane.
D If there are several clips containing the same performance controllers (e.g. mod wheel) on the same positions
in the song, only the performance controller data from the topmost lane will be kept.
This is the same rule as during playback - performance control data in the topmost lane has priority.
Get Groove From Clip
This requires that a single note clip is selected. The function will look at the notes in the clip and extract a groove
from these. You can apply this groove to other note lanes or save it as a groove patch for later use.
1. Create or record a rhythmic note “pattern” of some kind.
You may for example record a drum pattern, or use the notes playing the slices in a REX loop.