12.25

PANGEA WORLD INSTRUMENTS986
Connections
! Remember that CV connections are NOT stored in the Pangea patches! If you want to store CV connections be-
tween devices, put them in a Combinator device and save the Combi patch.
Sequencer Control inputs
The Sequencer Control CV and Gate inputs allow you to play Pangea from another CV/Gate device (typically a Matrix
or an RPG-8). The signal to the CV input controls the note pitch, while the signal to the Gate input delivers note on/
off along with velocity. There are also inputs for modulating the Pitch Bend and Mod Wheel parameters.
Modulation Inputs
These control voltage (CV) inputs can be used for modulating the Filter Cutoff and Resonance parameters, as well as
the Master Volume level.
Audio Out
These are the main audio outputs. When you create a new Pangea device, these outputs are auto-routed to the first
available Mix Channel in the Reason main mixer. If there is no Mix Channel available, a new one will be automatically
created.