12.25

PANGEA WORLD INSTRUMENTS973
Using Pangea
Loading and saving patches
Loading and saving patches is done in the same way as with any other internal Reason device, see “Loading patches”
and “Saving patches” for details.
Global performance and “play” controls
Note
The Note LED lights up each time Pangea receives a MIDI Note On.
Range
D Set the desired Pitch Bend range for the “Pitch” wheel with the up/down buttons, or by click-holding on the
display and dragging up/down.
Range: +/-12 semitones (+/-1 octave) in steps of +/-1 semitone.
Pitch
The Pitch bend wheel can be used for bending note pitches up and down. Pangea also responds to Pitch Bend MIDI
data from a connected MIDI master keyboard. You set the desired Pitch bend Range with the “Range” control to the
right of the Mod wheel.
Mod
The Mod wheel can be used for controlling the three predefined parameters to the right of the Mod wheel:
•S. Start
Here you set how/if the Mod wheel should affect the Sample Start position of the currently selected instrument.
The parameter is bi-polar, with zero modulation at the 12 o’clock position. A negative value moves the sample start
back and a positive value moves it forward.
! Note that if the S.Start parameter in the Instruments section (see “S. Start (Sample Start)”) is at 0 ms, the sam-
ple start cannot be moved back any further. Similarly, if the S.Start parameter in the Instruments section is at
150 ms, the sample start cannot be moved forward any further.
•F. Freq
Here you set how/if the Mod wheel should affect the Filter Cutoff parameter. The parameter is bi-polar, with zero
modulation at the 12 o’clock position.