12.25

RYTMIK DRUM MACHINE942
Connections
! Remember that CV connections are NOT stored in the Rytmik patches! If you want to store CV connections be-
tween devices, put them in a Combinator device and save the Combi patch.
Drum Gate In/Out
The Drum Gate inputs allow you to play Rytmik from another CV/Gate device. The Drum Gate inputs respond to
“Note On/Off” along with Velocity.
The Drum Gate outputs allow you to control other CV/Gate equipped devices from Rytmik. The Drum Gate outputs
send out “Note On/Off” along with Velocity.
Separate Outputs
The separate outputs can be used for routing individual Drum Channels to external destinations, for further process-
ing.
! Note that Drum Channels routed via separate outputs are automatically disconnected from the Master FX sec-
tion. Note, though, that the signal could still be sent to (and heard via) the Send Effects (Delay and Reverb) on
the Main Outputs.
Main Output L & R
These are the main audio outputs. When you create a new Rytmik device, these outputs are auto-routed to the first
available Mix Channel in the Reason main mixer. If there is no Mix Channel available, a new one will be automatically
created.