12.25

RYTMIK DRUM MACHINE935
Low Cut and Hi Cut Filter
The Filter features a Low Cut (Highpass) and a Hi Cut (Lowpass) filter. Perfect for removing any rumble (Lo Cut)
and/or hiss (Hi Cut), for example.
D Click and drag up/down in the Low Cut box to set the cutoff frequency for the highpass filter.
Alternatively click the left part of the filter curve in the display and drag sideways.
Range: 20 Hz to 25 kHz.
D Click and drag up/down in the Hi Cut box to set the cutoff frequency for the lowpass filter.
Alternatively click the right part of the filter curve in the display and drag sideways.
Range: 20 Hz to 25 kHz.
! Note that the Low Cut and Hi Cut cutoff frequencies can also be on opposite sides of each other, which means
that the level of the sample could eventually drop to zero with extreme settings.
The Master FX section
The Master FX section features controls for the Delay and Reverb send effects, as well as for the master bus Com-
pressor. The Send Effects can be used by all Drum Channels simultaneously, and the effects are active simultane-
ously.