12.25

MONOTONE BASS SYNTHESIZER919
Delay
This is a stereo delay, which generates delayed copies of the original signal.
Amount
D Use this parameter to adjust the send level to the Delay effect.
Set to 0% for a completely dry (unprocessed) signal.
Time
The delay time is synced to the main sequencer tempo.
D Set the sync division to the main sequencer tempo with the Time knob.
Range: 1/16, 1/8T, 1/8, 2/8T, 3/16, 1/4, 5/16, 4/8T, 7/16 and 2/4.
Feedback
D Set the number of delay repeats.
Ping Pong
D Activate Ping Pong to have the delay repeats alternate between left and right in the stereo panorama.
The LFO section
An LFO (Low Frequency Oscillator) is used for generating cyclic modulation. A typical example is to have an LFO
modulate the pitch of a signal to produce vibrato, but there are also other applications for LFOs. The LFO section fea-
tures an LFO which can be set to control Oscillator pitch (see “LFO”) and/or Filter frequency (see “LFO”).
Rate
D Set the LFO rate/speed.
Range: 0.06-94.0 Hz
Shape
D Turn the Shape knob to select one of three LFO wave shapes.
The wave shapes are: Sine, Triangle and Square.