12.25

MIMIC CREATIVE SAMPLER816
Automating the sample Start and End markers
Besides the regular modulation capabilities in Mimic, you could also automate and modulate the sample Start and
End markers from the main sequencer, to have them reposition in real-time during sequencer playback. This could be
useful if you have a longer recording/sample that you want to alter the playback position in:
1. Record some notes on the Mimic sequencer track in the sequencer and then hit Stop twice.
2. Hit Record again in the sequencer and drag the Sample Start and Sample End markers during recording:
q If you like, drag and move the Start/End marker up into the Slice Marker area above the waveform, to have the
Start/End marker snap to the closest slices. This works in all modes, not just in Slice Mode.
3. Hit Stop in the sequencer twice when you are done recording.
If you moved both the Sample Start marker and the Sample End marker you will now have two Parameter Auto-
mation lanes with clips on them on the Mimic sequencer track:
• The clips on the Start Pos and End Pos lanes represent the movements of the Sample Start and Sample End
markers respectively.