12.25

MIMIC CREATIVE SAMPLER812
D Select the desired Effect algorithm from the drop-down selector.
“Noise” adds noise to the signal (when a signal is present).
“Reso Noise” adds resonant noise to the signal (when a signal is present).
“Ring Mod” is a ring modulator effect.
“Bitrate” gives the effect of sample rate reduction.
“Lowres” combines sample rate reduction with bit depth reduction.
“Sine Fold” is a sinewave shaping distortion.
“Scream” produces a less bright type of distortion.
Effect Mod
D Set the character of the selected effect algorithm.
Mix
D Set the mix between the dry signal and the effect signal.
The EQ section
This is a Lo Cut and Hi Cut filter, which lets you cut out bass (lo cut) and treble (hi cut) frequencies from the sound.
Lo Cut
D Turn up the Lo Cut knob to cut out bass frequencies from the signal.
Range: 20.0 Hz to 4 kHz.
Hi Cut
D Turn down the Hi Cut knob to cut out treble frequencies from the signal.
Range: 200 Hz to 20 kHz.
The Send section
The Send knobs can be used for tapping the output signal of the Slot to the corresponding FX Send Out jacks on the
rear panel (see “FX Send Out”). You could then route the signals to external effect devices and then further to a sep-
arate mixer/audio channel.
D Control the Send output levels with the corresponding Send knobs.