12.25

MIMIC CREATIVE SAMPLER811
Gain
D Set the desired maximum level for the Amplifier with the Gain knob.
This is the maximum level the envelope will reach after the Attack stage is completed (see “A(ttack)”.).
Vel
D If you want the Gain level to be controlled from keyboard velocity, turn up the Vel knob.
Gain Mod
D Assign a modulation source in the drop-down selector to the right. Then, control the modulation amount with
the Mod knob.
q If you want to create a tremolo effect, select the LFO as Source in the drop-down selector.
Pan
D Set the panning of the output signal from the Amplifier in the stereo panorama.
Pan Mod
D Assign a modulation source in the drop-down selector to the right. Then, control the modulation amount with
the Mod knob.
q Since Pan works individually per voice, you can assign e.g. Keyboard Velocity, an Envelope or “Random” as
source to create cool panning effects.
The Compressor
This is a Compressor, which can be used for compressing the signal and evening out the signal levels.
D Turn the Squeeze knob to set the compression amount.
The red LED above the knob indicates the signal compression.
The Effect section
The Effect section features seven types of distortion/modulation effects, to spice up your sound.