12.25

MIMIC CREATIVE SAMPLER805
Semi
D Set the pitch in semitone steps.
Range: +/-24 semitones (+/-2 octaves).
! Note that if you are using the Tape Stretch type (see “Tape”), the pitch settings also affect the playback speed.
Tune
D Changes the pitch in steps of 1 cent.
Range: +/- 50 cents (down or up half a semitone).
LFO
D Sets how much the pitch should be affected by the LFO (see “The LFO section”).
Range: +/- 100%.
q By using the LFO Scale function (see “LFO Scale”), you can gradually introduce the LFO modulation amount by
using the Mod Wheel.
Pitch Mod
D Sets how much the pitch should be modulated by the source assigned in the drop-down selector to the right.
Range: +/- 100%.
The Filter section
The Filter section features eight different filter types.
Filter Type selector
D Click the Filter type drop-down selector to choose any of the following filter types:
•LP 24
This is a standard 24dB/octave lowpass filter. Set the cutoff frequency with the Freq knob and the
resonance amount with the Reso knob.
Frequency
Amplitude
RESO
FREQ