12.25

MIMIC CREATIVE SAMPLER796
Panel reference
The Sample section
Here is where you load/sample the audio for the currently selected Slot. The Waveform display differs somewhat, de-
pending on which Slot Mode you have selected (see “Slot Mode”).
A sample loaded in a Slot with Slice Mode selected.
Loading/sampling
D Load a sample using drag & and drop, or by clicking the Browse sample button, or by using the Up/Down but-
tons to scroll and load a sample from the currently selected folder.
D Drag a sample from the browser and drop on a Slot Select button, to load the sample in the desired Slot.
D Alternatively, sample straight into Mimic by clicking the Start sampling button (Reason stand-alone only):
See the “Sampling” chapter for more information about setting up and using Reason for sampling.
! It’s possible to load/sample stereo signals. However, the waveform will always be displayed as a mono signal,
regardless if it’s mono or stereo.
Root Key
A sample is automatically analyzed for its original pitch at the Sample Start position. The analyzed pitch is displayed
in the Root Key section. If you move the Sample Start marker, the sample is automatically re-analyzed.
D Click the “SET” button to use the analyzed Root Key.
This will automatically place the analyzed Root Key on the correct note on the keyboard, as indicated by an orange
key in the Note/range indicator below the Waveform display.
Waveform display
Position marker
Slice markers
Start
marker
End
marker
Sample Overview
Sample Load/Sampling section
Start marker indicator
End marker indicator
Sample range markers
Note/range indicator
Root Key section