12.25

GRAIN SAMPLE MANIPULATOR785
• The clip on the Display Y lane represents the vertical movements you made with the mouse during the record-
ing.
This automation doesn’t affect the sample playback in any way but can instead be used as a modulation source in
the Modulation Bus, for modulating the desired destination parameter(s).
• The clip on the Display Gate lane reflects when you clicked (and held) the mouse button during the recording.
This automation doesn’t affect the sample playback either but can be used as a modulation source in the Modula-
tion Bus, for modulating/gating the desired destination parameter(s).
• The clips on the Position and End Pos lanes represent the movements of the Sample Start and Sample End
markers respectively.
D If you like you could also record automation of the Sample Range Zoom and Scroll parameters by dragging the
markers in the Sample Overview area:
After recording the movements of the Sample Range markers, two new Parameter Automation lanes appear on
the sequencer track:
• The clip on the Scroll lane represents the movement of the leftmost Sample Range marker, and thus the move-
ment of the entire sample range.
• The clip on the Zoom lane represents the movement of the rightmost Sample Range marker, and thus the
zooming (in or/and out) of the sample range.
q It’s also possible to automate the Motion, Speed, Jitter and Global Position parameters.
q Also, don’t forget to check out the modulation example patches, see “Modulation example patches”.