12.25

GRAIN SAMPLE MANIPULATOR776
Phaser/Flanger/Chorus
This is a stereo Phaser/Flanger/Chorus.
D Select effect type with the Phaser/Flanger/Chorus switch.
The selected effect type is displayed on the Effect button.
•Depth
Sets the depth of the selected effect. To get a static sound, set Depth to zero.
•Rate
Sets the rate/speed of the modulation.
•Spread
Sets the stereo width of the effect.
•Amount
Sets the Dry/Wet amount of the effect.
q It’s also possible to modulate the start/center frequency of the Phaser/Flanger/Chorus using the “Chorus/
Flanger/Phaser > Frequency” destination in the Modulation Bus, see “The Modulation Bus section”.
Distortion
The Distortion effect features six different types of distortion.
D Select distortion type with the switch.
“Dist” produces a dense, rich analog type of distortion.
“Scream” produces a less bright type of distortion.
“Tube” emulates a tube type of distortion.
“Sine” is a sine shaping distortion.
“S/H” gives the effect of sample rate reduction.
“Ring” is a ring modulator effect.
•Drive
Sets the overdrive/feedback level of the selected distortion.
•Tone
This is a lowpass filter and sets the tone of the selected distortion.
•Amount
Sets the Dry/Wet amount of the distortion.