Manualshelf

12.25

ManualsBrandsPropellerhead Reason ManualsApplicationsReason
751752753754755756757758759760
Table Of Contents
EUROPA SHAPESHIFTING SYNTHESIZER752
Connections
! Remember that CV connections are NOT stored in the Europa patches! If you want to store CV connections
between devices, put them in a Combinator device and save the Combi patch.
Sequencer Control inputs
The Sequencer Control CV and Gate inputs allow you to play Europa from another CV/Gate device (typically a Matrix
or an RPG-8). The signal to the CV input controls the note pitch, while the signal to the Gate input delivers note on/
off along with velocity. There are also inputs for modulating the Pitch Bend and Mod Wheel parameters.
CV Modulation inputs and outputs
These assignable control voltage (CV) inputs and outputs can be used for modulation of and from assigned Source
and Destination parameters in the Modulation Bus section, see “The Modulation Bus section”.
Audio Output
These are the main audio outputs. When you create a new Europa device, these outputs are auto-routed to the first
available Mix Channel in the main mixer. If there is no Mix Channel available, a new one will be automatically created.