12.25

EUROPA SHAPESHIFTING SYNTHESIZER746
Delay
This is a stereo delay, routed as a send effect.
• Sync
Activate Sync to sync the delay time to the main sequencer Tempo.
•Time
This sets the time between the delay repeats. If Sync is active (see above), the Time parameter now controls the
time divisions.
• Ping Pong
Activate Ping Pong to have the delay repeats alternating between left and right in the stereo panorama. The effect
is also dependent on the Pan parameter (see below).
•Pan
Sets the panning of the delay repeats in the stereo panorama. If Ping Pong is active (see above) the Pan knob
controls the panning of the initial delay repeat as well as the total stereo spread of the remaining repeats.
•FB
The FB (feedback) parameter determines the number of delay repeats.
•Amount
Use this parameter to adjust the send level to the Delay effect.
q If you play a note, have a long delay feedback and turn down Amount, the echoes will continue. This allows for
automated “triggered delay” fx.
Distortion
The Distortion effect features six different types of distortion.
D Select distortion type with the switch.
“Dist” produces a dense, rich analog type of distortion.
“Scream” produces a less bright type of distortion.
“Tube” emulates a tube type of distortion.
“Sine” is a sine shaping distortion.
“S/H” gives the effect of sample rate reduction.
“Ring” is a ring modulator effect.
•Drive
Sets the overdrive/feedback level of the selected distortion.
•Tone
This is a lowpass filter and sets the tone of the selected distortion.
•Amount
Sets the Dry/Wet amount of the distortion.