12.25

THE MAIN MIXER463
About Level/Pan CV
On the back of the Programmer section of a Mix Channel or Audio Track device you will find CV inputs for the chan-
nel Level and Pan controls. These allow for automatic level and pan control from sources that output CV signals.
D Press [Tab] to flip the Rack around, then click the “Show Programmer” button to access the CV jacks.
Changing Fader section parameters on multiple channels simultaneously
In the Fader section you can change parameter values in a “ganged” or “linked” fashion on several selected Mix
Channels. You can change the Mute, Solo and Level fader parameters this way. The example below shows seven se-
lected channels, where the Level is reduced on the KorgBass channel and the rest of the channels’ Faders follow
along (with the same amount of level change in dB for each channel):
• If you don’t release the mouse button you can change the level back and the other channel faders will follow
along as expected.
! If you lower the level to minimum (or raise to max) so that all faders reach their end values, and then release
the mouse button, changing the level again will move all faders together equally.