12.25

WORKING WITH VST PLUGINS389
For each slot on the CV Programmer panel you can:
• Select a CV input.
Several slots can use the same CV input.
• Set a bipolar modulation Amount.
The range is -100 to 100.
• Select a VST destination parameter from a drop-down list.
This can also be done with Learn function (see below).
• Set a Base Value.
The Base Value is the value the parameter has the time you select it on the VST panel. This is similar to the “Static
Value” used when automating parameters on native Reason devices and Rack Extension devices. The exact Base
Value is shown in the corresponding value slider.
• Clear the CV assignment.
CV controlling VST parameters using the Learn function
1. Press [Tab] to flip the rack around.
2. Connect a CV cable from the device you want to use as control source, to the CV IN 1 input of the Plugin Rack
Device.
3. Press [Tab] to flip the rack back to the front again.