12.25

WORKING WITH VST PLUGINS384
The CV Programmer
The CV Programmer of the Plugin Rack Device.
On the CV Programmer panel you can route CV signals from other (modulation) devices in the rack to parameters of
the VST plugin. Each of the eight CV slots can receive a CV signal connected to the corresponding Modulation CV In
connector on the rear panel of the Plugin Rack Device (see “Rear panel” below).
Refer to “CV modulation of VST parameters” for information on how to route CV signals to VST parameters.
Rear panel
The rear panel of the Plugin Rack Device, with the CV Programmer unfolded.
The rear panel features Sequencer Control connectors for controlling VSTs from e.g. step sequencers and arpeggia-
tor devices. This section is available only if the Plugin Rack Device represents a VST Instrument. To the right are au-
dio inputs and outputs.
On the unfolded CV Programmer panel are eight CV modulation inputs, for controlling VST parameters from con-
nected CV modulation sources.
To the right on the CV Programmer panel are optional audio inputs and outputs. If the VST supports the use of mul-
tiple audio inputs and/or outputs, the available jacks are indicated by green LEDs.
For more details about CV controlling VSTs, see “CV modulation of VST parameters”.