12.25

RECORDING IN THE SEQUENCER138
Record enabling an instrument track
D To record enable an instrument track, click on the Record Enable button on a note lane on the instrument
track.
The Record Enable button lights up red and the track has Master Keyboard Input.
If you have selected “Standard” mode in the “Master Keyboard Input” section on the “MIDI” page in the Prefer-
ences dialog (see “The Master Keyboard Input setting”), selecting an instrument track will automatically set Master
Keyboard Input to that track - if the Manual Rec button in the Track List is Off, see “About the Manual Rec func-
tion”. An instrument track that has Master Keyboard Input will automatically be record enabled, and will also be en-
abled for parameter automation recording, indicated by the red Record Enable Parameter Automation button.
D If you want to record on another note lane on the instrument track, just click the corresponding Record Enable
button on the note lane.
! Only one note lane on one instrument track can have Record Enable active at a time, unless you have locked
additional MIDI keyboard controllers to specific instrument devices in the rack (see “Locking a surface” in the
Remote chapter). If you only have one MIDI keyboard controller (assigned as Master Keyboard), you can only
record notes on one note lane at a time (see “Setting Master Keyboard Input”).
Record Enable buttons
Record Enable Parameter
Automation button