12.25

THE COMBINATOR1330
CV Connections
The rear panel of the Combinator.
CV connections between devices in the Combi are saved with the Combi patches. This is also true for CV connec-
tions between devices in Combi and the Combi itself - e.g. if you have connected a Matrix in the Combi to one of the
CV inputs on the back of the Combi panel.
The following CV connectors can be found at the back of the Combinator:
Sequencer Control inputs
The Sequencer Control CV and Gate inputs allow you to play the Combinator from another CV/Gate device (typically
a Matrix or a RPG-8). The signal to the CV input controls the note pitch, while the signal to the Gate input delivers
note on/off along with velocity.
Control CV In
These CV inputs can be used for controlling four selectable controls on the Combinator front panel.
D Click the drop-down and select which panel control you want to modulate.
All currently available front panel controls are shown in the drop-down list.
D Attenuate the input signal with the corresponding attenuation knob.