12.25

THE COMBINATOR1319
It’s also possible to align and distribute a selection of controls, to get perfect position with even spacing on the panel.
D Select the group of controls you want to align/distribute, click the black arrow button on the control you want
to use as reference, and select action from the pop-up:
About the “Run” and “Bypass FX” buttons
The “Run” button can be used to start/stop all (Reason) pattern devices included in the Combi. This works exactly as
pressing the Run button on the pattern device panel. The on/off status of this button is not saved with the Combi
patch. Pressing play on the transport panel in the Sequencer will automatically activate “Run Pattern Devices”.
q In the Reason Factory Sound Bank, Combi patches containing pattern devices have “(run)” at the end of their
patch names.
The “Bypass FX” button allows you bypass all effect devices in a Combi. It works as follows:
• All insert effect devices in the Combi are switched to Bypass mode.
• All effects connected as send effects to a mixer device are switched off.
• Clicking this button will not affect effect devices that were bypassed or turned off already.