12.25

SYNCHRONOUS TIMED EFFECT MODULATOR1271
Connections
CV In
Curve 1/2/3
These CV inputs accept bipolar control signals. Each input CV signal is added to the corresponding Modulation Curve
signal and the resulting signal then modulates the assigned effect parameters.
The input signals can be attenuated with the corresponding attenuation knobs.
! If the resulting modulation curve value should be negative (below zero), the assigned effect parameters are
modulated with reversed polarity.
Freeze 1/2/3
CV signals with levels >0 patched to these inputs will activate the Freeze function for the corresponding Modulation
Curve. When the CV signals drops to 0 or below, the Freeze function is deactivated. See “FRZ (freeze) buttons” for
more information.
Master Level CV In
A CV signal on this input can modulate the “Master Level” parameter. You can attenuate the input CV signal with the
attenuation knob.