12.25

SYNCHRONOUS TIMED EFFECT MODULATOR1267
Sync button
D Click the Sync button to sync the delay times to the main sequencer tempo.
Set the time divisions (e.g. 1/1, 1/2, 1/4, 1/8 etc.) with the “Time knob”.
Roll button
The Roll function works like a “freezed” delay, perfect for stutter, repeat and glitch effects. When the Roll button is on,
and you turn up the Feedback knob, the input signal to the Delay section is gradually suppressed, while the feedback
is automatically raised internally. In Roll mode, the Amount knob controls the level of the delay signal when the
Feedback parameter is turned up. When the Feedback is set to zero, the Amount value is disregarded.
1. Click the Roll button to switch from the regular delay settings to Roll mode.
2. Turn the Feedback knob to set the mix between the rolled delay signal and the dry signal.
D To get an instant stutter/repeat effect, turn the Feedback knob up quickly from zero at the point where you
want the stutter effect. Then, quickly turn the Feedback knob back to zero again when you want the effect to
disappear.
q Experiment by changing the Time parameter to get different “stutter” times.
Pan knob
D Use the Pan knob to set the stereo position of the delay repetitions. In Ping Pong mode, the Pan parameter de-
fines where the initial delay bounce should be placed in the stereo panorama, see “Ping Pong button”.
Send/Return switch
D Select whether you want the Amount knob to control the Send level or the Return level of the delay effect.
The picture below shows the different configurations schematically:
The schematic placement of the Amount knob in Send and Return mode, respectively.
Delay On/Off button
D Click to switch on/off the Delay effect section.
If switched off, the signal is bypassed from the Delay section.
Delay
Amount
Audio In Audio Out
Feedback
Delay
Amount
Audio In Audio Out
Feedback
Send Return Send Return