12.25

SYNCHRONOUS TIMED EFFECT MODULATOR1266
Lag knob
D Increase the Lag to get smoother frequency variations when the Freq parameter is modulated.
This works like a sort of “portamento” for the Freq parameter, i.e. the Freq parameter will move more slowly when
modulated if the Lag value is high.
Filter On/Off button
D Click to switch on/off the Filter effect section.
If switched off, the signal is bypassed from the Filter section.
Delay
Amount knob
D Set the amount of the delay signal.
At 0, the signal is left completely dry.
Time knob
D Set the time between the delay repetitions.
If the “Sync button” is on, the Time values can be stepped between time divisions (e.g. 1/1, 1/2,
1/4, 1/8 etc.) relative to the main sequencer tempo.
Feedback knob
D Set the feedback amount, i.e. the amount of repetitions, of the delayed signal.
Keep Pitch button
When you manually change the Rate during recording or playback, you will notice that the pitch of the delayed signal
also changes. If this effect is undesirable, you can enable Keep Pitch, which will ensure that the pitch remains fixed
regardless of changes in Rate.
Ping Pong button
With Ping Pong enabled, the stereo position of each delay repeat will alternate between left and right. The “Pan knob”
determines the stereo width as well as the position of the initial repeat. When the Pan knob is set to full Left, the first
delay bounce will be panned hard Left, the second will be panned hard Right, and so on. When the knob is set to full
Right, the order is reversed (R > L > R etc).