Manualshelf

12.25

ManualsBrandsPropellerhead Reason ManualsApplicationsReason
1261126212631264126512661267126812691270
Table Of Contents
SYNCHRONOUS TIMED EFFECT MODULATOR1264
Distortion type selector
D Select distortion type by clicking the corresponding LED button.
In Ring Mod mode, the Character knob controls the ring modulator frequency.
In Lo-Fi mode, the Character knob controls the sample rate. There is no anti-aliasing filter in this algorithm, so
there will be a lot of nice lo-fi character to the sound.
Post Filter button
D Click the Post Filter button to route the Dist section after the Filter section (instead of before, which is the
standard routing).
The routing order can have a big impact on the frequency content in the sound. Since the Dist section adds
frequencies to the sound, you might want to preserve these by routing the Dist section after (Post) the Filter
section.
Dist On/Off button
D Click the Dist button to switch on/off the Dist effect section.
If switched off, the signal is bypassed unaffected.
Filter
Freq knob
D Set the cutoff frequency (for the HP, LP and Comb filter types) or center frequency (for the BP filter type).
Resonance knob
D Set the resonance amount of the filtered signal.