Manualshelf

12.25

ManualsBrandsPropellerhead Reason ManualsApplicationsReason
1251125212531254125512561257125812591260
Table Of Contents
SYNCHRONOUS TIMED EFFECT MODULATOR1259
Panel reference
The display section
Tool buttons and the Free button
D Click the Stepped Line button when you want to draw a curve that has fixed levels between each vertical grid
line in the display:
The result when you draw will be a jagged curve with vertical steps.
D Click the Linear Line button when you want to draw straight lines between the vertical grid lines in the display:
D Click any of the Waveform buttons when you want to draw (repetitive) waveforms in the display:
In these situations, the Rate buttons define the waveform cycle lengths, see “Rate buttons”.
D Click the Free button in combination with a Line button to be able to freely define the amplitude between each
of the vertical grid lines in the display:
D Click the Free button in combination with a Waveform button to be able to freely define the waveform’s ampli-
tude between each of the vertical grid lines in the display:
Rate buttons
D Use the Rate buttons to define the waveform cycle length when you draw waveforms in the display.
You can alter between different time rates throughout the loop by clicking another Rate button and continue
drawing from where you stopped.
! When you have selected a Line tool, the Rate buttons automatically become invisible.