12.25

MASTER BUS COMPRESSOR1250
External Sidechain
You can use external signals to trigger the Master Bus Compressor. This is done by connecting an external signal to
the Sidechain Inputs on the back of the Master Bus Compressor.
The Sidechain inputs.
When a cable is connected to the Sidechain Input(s) the “Connected” LED is lit on the front panel:
D Click the Sidechain button to “key” (trigger) Master Bus Compressor from the external signal instead of the
channel signal.
For example, you could use a kick drum pattern to trigger the sidechain function, to achieve a rhythmic pumping
effect.